Informasjon
Scarfini V3 Air Carbon Thruster Large
Finneoppsett: Thruster
Finnesystem: Futures Single tab
Størrelse: Large
Konstruksjon: Air Carbon
New in from Scarfini in a thruster twin tab base is an ultra-lightweight and durable design called the Air Fin. The fin so light that it floats. To make this so, the Durban based designers and manufacturers developed a core that is essentially made from 90% air while the remaining 10% is made up of a combination of closed-cell thermoplastic and recyclable polymer foam. The core is then wrapped by a carbon fibre base and leading edge which is designed to have ultimate control over flex from base to tip.
This Large set of thrusters will fit a single tab (Futures) fin box and come in Scarfini’s Velox template which sits upright with less of a curve to produce and maintain high speed. The setup also has a smaller centre fin for quicker tail release. An excellent choice for powerful conditions.
Specification
- Recommended rider weight range: 70kg-90kg
- Base: 113mm / 4.5″
- Height: 117mm / 4.61
- Area: 9780mm² / 15.20²
Centre Fin Dims:
- Base: 111mm / 4.37″
- Height: 115mm / 4.53″
- Area: 9520mm² / 14.75²
Scarfini Fins
Kvalitetsfinner til surfing laget for hånd i Sør Afrika. Av surfere - for surfere. Finnene er avansert bygget med verdensledende materialer og teknikker. Finnene kompatibelt med både Futures og FCS I finnesystemet. Du kan trygt velge Scarfini som dine neste finner. Her får du veldig gode finner til en hyggelig pris.
ENJOY THE RIDE!
Fins Knowlege
FIN TEMPLATE CHARACTERISTICS
WHEN CHOOSING YOUR IDEAL FIN IT IS VERY IMPORTANT TO KNOW ABOUT THE CHARACTERISTICS OF A FIN TEMPLATE. THIS INFORMATION WILL ENABLE YOU TO UNDERSTAND HOW FINS WILL PERFORM IN THE WATER UNDER DIFFERENT CONDITIONS.
AREA: THIS IS THE MOST IMPORTANT VARIABLE TO CONSIDER WHEN LOOKING FOR FINS. THE FINS AREA IS BASICALLY THE SIZE OF THE FIN, WHICH IS DETERMINED BY THE WEIGHT OF THE RIDER. A LARGER FIN AREA WILL GIVE YOU MORE HOLD AND DRIVE. A SMALLER FIN AREA WILL HAVE A LOOSER FEEL.
BASE: THE BASE HAS A DIRECT EFFECT ON THE DRIVE OF THE FIN. A LARGER BASE INCREASES DRIVE AND ACCELERATION, BUT IT COULD MAKE YOUR BOARD HARDER TO TURN.
HEIGHT: THE HIGHER THE FIN IS THE MORE HOLD IT CREATES, MAKING IT IDEAL FOR BIGGER RIDERS. A SHORTER FIN WILL FEEL LOOSER, WITH A QUICKER RELEASE .
RAKE: A LONGER RAKE WILL DRAW A WIDER TURNING ARCH, MAINTAINING GOOD HOLDING POWER. THIS MAKES IT IDEAL FOR POINT BREAK WAVES. A SHORTER RAKE WILL DRAW A QUICK AND TIGHT ARCH. THIS IS IDEAL FOR POCKET SURFING AND ON PUNCHING BEACH BREAKS .
FLEX : THE FLEXIBILITY OF THE FIN TIP. A STIFF FIN IS FAST AND RESPONSIVE, ALTHOUGH IF IT'S TOO STIFF IT WILL MAKE YOUR BOARD HARD TO TURN. A FLEXIBLE FIN IS MORE FORGIVING AND OFFERS A WHIPPING SENSATION DURING TURNS, BUT IT MAY MAKE YOU FEEL AS IF YOU'RE LOSING CONTROL IF IT'S TOO FLEXIBLE.
CANT: THE ANGLE OF THE SIDE FIN IS MEASURED FROM A PERPENDICULAR LINE TO THE FLAT BOTTOM OF A SURFBOARD. MORE CANT WILL INCREASE MANEUVERABILITY AND GIVES A LOOSE FEEL. LESS CANT GENERATES FAST ACCELERATION AND STIFFER FEEL. 
FOIL: THE SHAPE OF THE FIN IS MEASURED FROM THE FRONT EDGE TO THE TRAILING EDGE AND AFFECTS HOW WATER FLOWS ACROSS IT. THE HYDRODYNAMIC INSIDE FOIL HAS THE CAPABILITY TO INCREASE SPEED AND DRIVE WHICH REDUCES DRAG, WHILE THE TRADITIONAL FLAT FOIL OFFERS GOOD CONTROL OF SPEED RESULTING IN A QUICKER RELEASE IN EACH TURN.
ABOUT SCARFINI FINS
MOST OF SCARFINI FINS ARE BUILT WITH AN ALL ROUND TEMPLATE. THE BASE, HEIGHT AND RAKE ARE WELL BALANCED TO CREATE A BASIC TEMPLATE TO PERFORM WELL IN A WIDE RANGE OF CONDITIONS. THE FOIL DESIGN USED IN ALL OF OUR FINS FEATURE A GENTLE INSIDE FOIL AT THE BASE WHICH GRADUALLY CONVERTS TO FLAT FOIL TOWARD THE TIP. THIS FOIL SHAPE HAS PROVEN TO HAVE THE ABILITY TO GENERATE EXTRA SPEED AND DRIVE, BUT RELEASES LIKE A FLAT FIN.
ENJOY THE RIDE!
Alternative produkter
Kunder som så på dette så også på
Kunder kjøpte også
-50%
