Lost The Ripper 5'9 (29.5L) Light Speed Surfebrett
Størrelse: 5'9 x 19.5 x 2.4 x 29.5 Liter
Konstruksjon: Light Speed Pro-Formance Epoxy
Farge: Clean hvitt m/logo og light speed details
Finneoppsett: 3-fin Futures - Finner selges separat
Shape: Rounded Squash
The RIPPER!
A rip-roaring, radically fun, small wave slasher, carved out from the ridiculously popular Rad Ripper. A board designed to violently shred everyday, average surf and leave neon ’80s nostalgia dying on the sand.
The RIPPER was inspired by Kolohe Andino, whose love for (and performances on) the Rad Ripper are undeniable. Admittedly addicted to the Rad Ripper, Kolohe requested adjustments that would eliminate the nostalgic ’80s influences and create a more modern look with less emphasis on revivalism, resulting in an all-new small wave shred sled.
To achieve this, we removed the beak nose and re-foiled the entire deck line, abandoning the flat deck and steep rails for a more contemporary, moderately rolled rail and deck. The tail is scooped out with a thinner, boxy block. We removed the deep fluted wing, leaving behind a subtle bump/hip, but retained plenty of small wave surface area. The nose is slightly pulled, with a touch more rocker, to fit just a bit better into kinky transitions.
Like its forefather, the Rad Ripper, The RIPPER retains an overall low rocker with a single concave center and a deep double concave/vee that runs through the fins and out the tail. The built-in speed, paddle-ability, and firm carving control that defined the Rad Ripper are integrated into this update.
The RIPPER loves to be surfed aggressively, off the tail. The low rocker and wide tail block relish rear foot pressure, driving, snapping, and carving harder the more aggressively it’s ridden. More modest or casual surfers will also enjoy its built-in speed and the ease of directional changes enabled by the double concave vee.
The rolled deck, lower/softer rails, increased nose rocker, and reduced nose area, combined with a more blended tail outline and scooped out deck, all work together to modernize and unleash The RIPPER, out of the shadows and into the limelight. The RIPPER is a small wave weapon for hacking and lacerating minuscule to moderate surf, under the feet of both average Joes and pumped-up pros.
Ride about the same size as your original Rad Ripper but with a touch less foam for a cheeky feeling or easily go a bit longer if you want to cruise and enjoy.
DIMS
| 5’2 | 17.75 | 2.15 | 21.65 |
| 5’3 | 18 | 2.18 | 22.75 |
| 5’4 | 18.25 | 2.22 | 23.75 |
| 5’5 | 18.5 | 2.25 | 24.75 |
| 5’6 | 18.75 | 2.3 | 26 |
| 5’7 | 19 | 2.34 | 27.25 |
| 5’8 | 19.25 | 2.37 | 28.5 |
| 5’9 | 19.5 | 2.4 | 29.5 |
| 5’10 | 19.75 | 2.45 | 30.75 |
| 5’11 | 20 | 2.5 | 32.25 |
| 6’0 | 20.25 | 2.53 | 33.5 |
| 6’1 | 20.5 | 2.56 | 34.75 |
| 6’2 | 20.75 | 2.6 | 36.25 |
| 6’3 | 20.88 | 2.63 | 37.4 |
| 6’4 | 21 | 2.66 | 38.5 |
| 6’5 | 21.25 | 2.72 | 40.25 |
| 6’6 | 21.5 | 2.75 | 41.75 |
Lost Mayhem Surfboards er en surfebrettprodusent fra San Clemente i California, USA. Selskapet ble grunnlagt av Matt "Mayhem" Biolos i 1992 og er kjent for å produsere surfebrett av høy kvalitet som er designet for å møte kravene til surfere på alle nivåer. Biolos har samarbeidet med noen av verdens beste surfere, blant annet Taj Burrow og Kolohe Andino, for å designe brett som kan prestere på et høyt nivå. Lost Mayhem Surfboards tilbyr også et bredt utvalg av brett for alle typer bølger og stiler, fra shortboards til longboards og alt i mellom.
Vi i surfshop.no er stolte av å kunne tilby Lost 'Mayhem' surfebrettene til norske surfere. Har vi ikke modellen eller størrelsen du ønsker deg på lager? Helt i orden, vi spesialbestiller det til deg. Ta kontakt så hjelper vi deg med å finne drømmebrettet. PS: Vi følger internasjonale priser og konverterer på Euroen. Det kan bety at ogå prisene vil kunne endre seg noe på nettisden over tid. Ta kontakt med oss om du har spørsmål. Vi har prismatch på surfebrett.
LightSpeed is our proprietary surfboard construction built with lightweight EPS foam and high strength epoxy resin. LightSpeed uses a combination of Rapid-Reflex Carbon Fiber as well vibration dampening Innegra-Fibers, woven into the finest custom performance fiberglass cloth.
Like the name implies, LightSpeed is both light and exceptionally fast, allowing you to take your surfing to new levels of speed and Pro-formance. Developed in-house, our crew of board builders worked closely with our top Jr and WQS team riders to create the best possible technology for High Pro-formance small wave and every day surfing. After well over a year of testing various versions, and R&D with some of the world’s best young surfers, we are now making this exciting custom surfboard construction available to all.
LIGHT SPEED Custom Composite features:
Ultra-Light / Ultra-Lively Foam Core: Steam molded, High Strength-to-Weight Ratio, fused cell, water resistant, stringer-less EPS foam core.
High-Strength, Flexible, Impact Resistant, Epoxy Resin System. Woven Carbon Fiber Centerline “Stringer” (top and bottom): Engineered to add both strength and Rapid-Reflex “pop”, with just enough release to feel forgiving underfoot. The Carbon loads up under foot pressure, and springs upon release.
Fused Carbon, Tail Reinforcement Patches: Transfers more direct input into rail and adds strength.
Centerline Aligned Carbon “Exo-Stringers”: Enable natural Torsional Twist, similar to a wood stringer board, but lighter, and with a much faster reflex reaction and more “pop”.
Innegra Infused, Engineered Composite Fiberglass: A multi weave (6oz lengthwise, woven with 4oz, rail to rail) fiberglass, top and bottom, adds significant break strength, while keeping the boards Ultra-light and Ultra-lively.
5oz Warp-Weave Fiberglass: A multi weave (6oz lengthwise, woven with 4oz, rail to rail) fiberglass, top and bottom, adds significant break strength, while keeping the boards
Ultra-light and Ultra-lively.
LightSpeed – Light and exceptionally fast technology, allowing you to take your small wave and everyday surfing to new levels of speed and Pro-formance.
