Handlekurven er tom


Lost V3 6'0" (33L) Carbon Wrap Surfebrett


Størrelse: 6'0 x 20 x 2.50 x 33 Liter
Farge: Clean hvitt med Carbon Wrap
Konstruksjon: Stringerless Carbon Wrap EPS Epoxy 
Setup: 5-fin Quad/Thruster FCS II - Finner selges separat


NB: Husk at Epoxy har en litt annen flyteevne enn vanlig PU brett. Usikker på hva dette vil si? Ta kontakt.  

Matt Biolas om V3 Rocket:

The V3 Rocket is an extension of the Rocket Collection. Released in 2014, it quickly became a top-selling standout and a custom order favorite. From the average everyday surfer to the traveling pro, almost all who ride a V3 are stoked. Word has spread, and popularity continues to grow. From my personal 6’0′ x 40 liter “go-to” board, to Luke Davis winning a WQS on a 23 liter 5’4′, the diversity is clear …it’s a great all around hybrid design for just about any type of surfer. Nate Yeomans won two more Pro events on a V3: the 2014 O’neill Cold Water Classic on a stock 5’9″ V3 in standard construction, and most recently the 2015 SunDiegoAmSlam on a stock 5’7″ in BlackDart. 


CARBON WRAP™ Is a patented surfboard technology, structurally engineered for optimum flex and performance. Originally created by Gold Coast surfboard manufacturer, Dan MacDonald, to be light weight without sacrificing strength and provide #nextlevel performance. Carbon Wrap eliminates the standard wooden stringer, alters traditional flex principles and re-envisions the way a surfboard’s flex patterns are created and controlled. Ultra-light, EPS cores are “wrapped” in an exoskeleton of strategically positioned, carbon fiber bands. Aligned together at the nose, they gradually curve outward towards the rails. The curve creates and controls a unique torsional flex that livens up as it nears the tail, just in front of the fins. The carbon then “wraps” from the bottom, around the rails and onto the deck. This unique method creates Carbon Wrap’s lively flex that loads and releases…resulting in nextlevel speed and drive. Running along the rails, on the deck, the carbon acts as a rear foot power point, (increasing drive and control) and a patch to minimize pressure denting. Using optically brightened epoxy resin, the boards are encased with a proprietary composite of fiberglass and our exclusive carbon deck inlay, which is strategically positioned to add fast re-flex memory under the surfer’s stance and allow subtle, natural deck caving around the arch of the front foot. By tapering the carbon into long, pointed ends, forward and aft, the flex blends out naturally towards the nose and tail.  A full layer of 45degree “X-Glass”, encases the deck. The X-Glass’s flat, bi-axel weave dramatically adds strength without rigidity, or excess weight and allows the board to maintain flex while alleviating crease points created by standard, 90degree fiberglass. The 45degree weave radiates foot pressure outward, directly connecting the foot to a longer section of the rail, adding greater edge control. CARBON WRAP TECHNOLOGY: Lightweight, without sacrificing strength.  Increases drive and provides and unique and lightning fast re-flex effect,  propelling your surfing into the #nextlevel of performance.

Share |

Relaterte produkter